KT-S Fish Scaler Parts
The 200 cm (59") rubber casing for the KT-S Commercial Fish Scaler
attaches the motor to the hand-piece and covers the 200 cm drive shaft.
There is also a 150 cm version.
The Rubber Casing Kit comes with the following pieces when ordered:
1 Rubber Casing (Part 50/2)
1 Washer (Part 53)
2 Circlips (Part 54) (only one is needed, however they are delicate and two are provided for your convenience)
Instructional Guide
The KT-S parts diagram can be downloaded here: KT-S parts diagram
Care must be taken when replacing the casing. It is very important to
properly attach it correctly to both the hand-piece and the motor.
Failure to do so will result in poor operation and cause breaks in the
shaft. Please follow the guide in replacing.
MAINTENANCE GUIDE FOR KT-S DRIVE SHAFT AND CASING
When you replace the drive shaft or casing on the KT-S electric fish scaler, follow this guide. You can print it out.
You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or casing.
Maintenance
All hand fish scalers have a rotating metal drive shaft that should be lubricated when installed and monthly in use. We recommend this Food Grade Super Lube Grease available from Grainger.