AutoFishScalers

Automatic Fish Scaling Station - Industrial/Commercial Grade The Automatic Fish Scaling Station is a high speed fish scaler for commercial operations. It has been produced for decades and is installed in many locations all over the world. It requires little maintenance other than periodic sharpening of the blades. It can process up to 125 fish per minute. Larger fish take longer. Various models can handle fish from 4 oz. (113 g) to 16 lbs. (10 Kg.) and up to 12" wide.  A video of various...

The EXOS 130 Electric Pin-Bone Remover series is an efficient one wheel electric pin-bone remover for small fish including Trout. ____ ____ EXOS 130 The EXOS 130 is best used with small fish including Trout fillets as small as 4 oz.  The EXOS was originally developed for salmon, making it unsuitable for the bones in smaller fish.  To resolve this, we made an optional thicker nylon guide to close the gap between the wheel and the guide.  See the photo above.  We...

The EXOS-221 series Electric Pin-Bone Remover is the most efficient high-capacity pin bone remover available.   EXOS Electric Pin-Bone Remover EXOS-221 The EXOS-221 is the most productive hand held pin-bone machine we know of. It has two wheels rather than one, which allows it to move over the fillet faster than single wheel machines. It eliminates second passes. If the first wheel misses a bone, the second wheel gets it.  Removes All Bones The EXOS-221 removes ALL bones, including...

KT-S Fish Scaler Part This is the 150 cm (59") metal flexible drive shaft for the KT-S Commercial Fish Scaler. There is also a 200 cm version. This part can be very easily replaced, but it is important to do it properly. Please read the guide below. If the core and casing are not installed properly, they will not perform well and will wear prematurely. MAINTENANCE GUIDE FOR KT-S DRIVE SHAFT AND CASING When you replace the drive shaft or casing, follow this guide. You can print it out. You can...

Our KT-S Fish Scaler Parts 200 cm (78") metal flexible drive shaft for the KT-S Commercial Fish Scaler.MAINTENANCE GUIDE FOR KT-S DRIVE SHAFT AND CASINGWhen you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. MaintenanceAll hand fish scalers have a rotating metal drive shaft that should be lubricated when installed and monthly in use. We recommend this Food Grade Super Lube Grease...

Ryco Automatic Pin-Bone Remover The Ryco dual lane pin-bone remover handles up to 30 fillets per minute. The machine operates in a one-way flow and removes 95% of all pin-bones. Species processed include Red Salmon, fresh and refreshed Chum Salmon, fresh and refreshed Coho Salmon, wild and farmed King Salmon, wild and farmed Atlantic Salmon, farmed Arctic Char Trout. Automatic Pin-Bone Remover Advantages: Extremely efficientGentle to filletsMinimizes production costsRequires fewer...

Ryco Automatic Pin-Bone Remover The Ryco single lane pin-bone remover is smaller than the other pin-bone removers and suitable for smaller processing plants. The machine operates in a one-way flow and removes 95% of all pin-bones. Species processed include Red Salmon, fresh and refreshed Chum Salmon, fresh and refreshed Coho Salmon, wild and farmed King Salmon, wild and farmed Atlantic Salmon, farmed Arctic Char Trout. After the fillets go through the machine, they pass to a worker for...

The KT-S Electric Fish Scaler is the preferred choice of commercial fisheries all over the world. The reason? The cord is thinner (9/16"), lighter and more flexible than any other commercial hand scaler, allowing the operator to work longer without tiring. If you are seeking a scaler with a 220 volt power supply, please contact us in email or by phone.   Construction of the KT-S The metal scaling head is protected by a metal splash guard, and spins on ball-bearings. All external...

Long Salmon Spindle with Cover for KT-S We had a number of requests from users who were scaling flat sided fish and large salmon to make the spindle longer. So we created the Long Salmon spindle for the KT-S electric fish scaler. This spindle is twice as long as the regular Salmon spindle, so it scales more area on a flat sided fish. The regular salmon spindle covers 2.25", and the Long Salmon 4.5". If you are seeking just the long spindle or the just the long splash guard, please call us to...

Long Standard Spindle with Cover for KT-S We had a number of requests from users who were scaling flat sided fish to make the spindle longer. So we created the Long Standard spindle for the KT-S electric fish scaler. This spindle is twice as long as the Standard spindle, so it scales more area on a flat sided fish. The Standard covers 2.25", and the Long Standard 4.5".If you are seeking just the long spindle or the just the long splash guard, please call us to order the single part, not as a...

The Northrock Electric Fish Scaler is one of the most rugged units on the market.   The Northrock Scaler is designed to be hung from above. The older model is turned on by removing the head from the U shaped hook, and pushing the hook up. When finished, placing the head back into the hook turns it off.  The current model is turned on using an ON/OFF toggle switch located on the underside of the motor housing. These are pictures of the scaler mounted in hanging position and up close...

Our Electric Fish Scalers The Food Machinery of America Electric Fish Scaler is a heavy duty performer for commercial use. This fish scaler is made by Northrock. There is no difference between an FMA scaler and a Northrock or Haskins-Strand other than name. Starting in 2017, the FMA fish scaler switched to the Northrock model. Prior to that it was a Haskins-Strand. If you are buying a new fish scaler, we recommend the Northrock. It has been updated and is more reliable. If you have the older...

The Haskins-Strand Fish Scaler has been discontinued. The scaling head is shown with a diamond tooth tool. THE HASKINS-STRAND FISH SCALER HAS BEEN DISCONTINUED. NO PARTS ARE AVAILABLE.   The HS was made by Northrock. It differed from the Northrock scaler by having a different hand piece, drive cables (Standard and HD), and connections to the motor and the hand piece. The motor, head, casing and tools are the same. The Northrock is an improvement with less complicated parts. YOU CAN...

The Diamond cutter spindle was developed by Auto Fish Scalers at the request of fish processors who wanted a more aggressive scaling head than the regular KT-S spindles. Unlike those heads, this one is made of machined bronze with sharp edges. You attach it with a screw on the rotating shaft.  Very quick and easy.We sent out prototypes to a number of processors. Everyone liked it better than the other spindles, some for all fish they processed, others for some species. We highly recommend...

This is the Standard spindle for the KT-S electric fish scaler. It is made of stainless steel and screws onto the rotating post in the KT-S hand piece. Very easy to install or remove. The Standard spindle comes with the KT-S Fish Scaler and is used for most fish. We have optional spindles for large scale fish, flat sided fish, and specialty spindles for Salmon. Some of our customers wanted a more aggressive spindle, so we developed the Diamond spindle. Take a look.

Our KT-S Fish Scaler Parts The KT-S Large Scaling Spindle is for descaling fish with very large scales.

Our KT-S Fish Scaler Parts The KT-S Salmon spindle is similar to the regular spindle, but specially designed for Salmon. It has cut-outs so it doesn't float on the slime.

This is the adaptor for the Heavy Duty Northrock fish scaler. It attaches to the motor and fits the Heavy Duty cable. There is a separate core adaptor for the Standard Northrock fish scaler.  

Northrock Fish Scaler Part - Heavy Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Heavy Duty core. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter....

Our Northrock Fish Scaler Parts Northrock Standard Duty core and rubber casing assembly. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter. The core inside the casing looks like this:This is a picture of the casing: When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or...

Northrock Heavy Duty core and rubber casing assembly. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter. The core inside the casing looks like this:This is a picture of the casing:When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or casing. ...

This is the core adaptor for the STANDARD Northrock fish scaler.  http://www.cnn.com/ It attaches to the motor to drive the Northrock Standard core (drive cable).  It will not work on the Heavy Duty model.

Northrock Fish Scaler Standard Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Standard Duty core. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter....

Lubricant for fish scaler rotating shafts. 1 lb container. MSDS (OSHA Safety Data Sheet) here.

Northrock Standard Duty Fish Scaler Hand-pieceThe Northrock Standard Duty handpiece is made of high quality corrosion resistant aluminum.The Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable. The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring.This is the...

Northrock HD Fish Scaler HandpieceThe Northrock Heavy Duty handpiece is made of high quality corrosion resistant aluminum.The Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable. The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring.This is the hand-piece that works...

Northrock Handpiece Guard for 6 flute tool The Northrock 6 flute tool is larger than either the 8 flute or diamond tool, so its guard is slightly larger to accommodate the larger size. This tool can also be used with the diamond tooth and eight flute tools, but it will have a slightly bigger gap allowing for a bit more spray. It is made of high strength, impact resistant, glass-filled nylon.When you order a guard, the set screws come with the purchase. ...

Northrock Handpiece Guard for Diamond and 8 flute tool The Northrock handpiece guard for Diamond and eight flute tool is slightly smaller than the guard for the six flute tool. It attaches to the handpiece to cover the scaling tool to reduce the spray. It is made of high strength, impact resistant, glass-filled nylon.When you order a guard, the set screws come with the purchase.

The Northrock Scaling Head Complete, Heavy Duty, includes all parts connected to the motor to drive the scaling head for the heavy duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Heavy Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DX2 The Heavy Duty Core...

The Northrock Scaling Head Complete, Standard duty, includes all parts connected to the motor to drive the scaling head for the standard duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Standard Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DW1 The...