KT-S

Our KT-S Fish Scaler Parts 200 cm (78") metal flexible drive shaft for the KT-S Commercial Fish Scaler.MAINTENANCE GUIDE FOR KT-S DRIVE SHAFT AND CASINGWhen you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. MaintenanceAll hand fish scalers have a rotating metal drive shaft that should be lubricated when installed and monthly in use. We recommend this Food Grade Super Lube Grease...

KT-S Fish Scaler Part This is the 150 cm (59") metal flexible drive shaft for the KT-S Commercial Fish Scaler. There is also a 200 cm version. This part can be very easily replaced, but it is important to do it properly. Please read the guide below. If the core and casing are not installed properly, they will not perform well and will wear prematurely. MAINTENANCE GUIDE FOR KT-S DRIVE SHAFT AND CASING When you replace the drive shaft or casing, follow this guide. You can print it out. You can...

The KT-S Electric Fish Scaler is the preferred choice of commercial fisheries all over the world. The reason? The cord is thinner (9/16"), lighter and more flexible than any other commercial hand scaler, allowing the operator to work longer without tiring. If you are seeking a scaler with a 220 volt power supply, please contact us in email or by phone.   Construction of the KT-S The metal scaling head is protected by a metal splash guard, and spins on ball-bearings. All external...

Long Standard Spindle with Cover for KT-S We had a number of requests from users who were scaling flat sided fish to make the spindle longer. So we created the Long Standard spindle for the KT-S electric fish scaler. This spindle is twice as long as the Standard spindle, so it scales more area on a flat sided fish. The Standard covers 2.25", and the Long Standard 4.5".If you are seeking just the long spindle or the just the long splash guard, please call us to order the single part, not as a...

Long Salmon Spindle with Cover for KT-S We had a number of requests from users who were scaling flat sided fish and large salmon to make the spindle longer. So we created the Long Salmon spindle for the KT-S electric fish scaler. This spindle is twice as long as the regular Salmon spindle, so it scales more area on a flat sided fish. The regular salmon spindle covers 2.25", and the Long Salmon 4.5". If you are seeking just the long spindle or the just the long splash guard, please call us to...

The Diamond cutter spindle was developed by Auto Fish Scalers at the request of fish processors who wanted a more aggressive scaling head than the regular KT-S spindles. Unlike those heads, this one is made of machined bronze with sharp edges. You attach it with a screw on the rotating shaft.  Very quick and easy.We sent out prototypes to a number of processors. Everyone liked it better than the other spindles, some for all fish they processed, others for some species. We highly recommend...

Our KT-S Fish Scaler Parts The KT-S Large Scaling Spindle is for descaling fish with very large scales.

Our KT-S Fish Scaler Parts The KT-S Salmon spindle is similar to the regular spindle, but specially designed for Salmon. It has cut-outs so it doesn't float on the slime.

KT-S Fish Scaler Parts The 200 cm (59") rubber casing for the KT-S Commercial Fish Scaler attaches the motor to the hand-piece and covers the 200 cm drive shaft. There is also a 150 cm version. The Rubber Casing Kit comes with the following pieces when ordered: 1 Rubber Casing (Part 50/2) 1 Washer (Part 53) 2 Circlips (Part 54) (only one is needed, however they are delicate and two are provided for your convenience) Instructional Guide The KT-S parts diagram can be downloaded here: KT-S parts...

KT-S Fish Scaler Part The 150 cm (59") rubber casing for the KT-S Commercial Fish Scaler attaches the motor to the hand-piece and covers the 150cm drive shaft. There is also a 200 cm version. The Rubber Casing Kit comes with the following pieces when ordered: 1 Rubber Casing (Part 50) 1 Washer (Part 53) 2 Circlips (Part 54) (only one is needed, however they are delicate and two are provided for your convenience) Instructional Guide The KT-S parts diagram can be downloaded here: KT-S...

Our KT-S Fish Scaler Parts This is the KT-S Hand-piece with or without the Standard spindle. The diagram shows the components of the hand piece. It includes all parts shown if you order with the Standard spindle.   If you order without the spindle, it will not include part 43.  You attach it to the rubber casing by screwing it into the casing and tightening a nut to hold them together. See our guide for replacing the casing. Here is a diagram of the parts included: The Standard...

KT-S 200 cm Complete Scaling Head assembly (drive shaft, casing, handpiece, regular spindle and guard, everything except motor & power cord.)