Northrock

The Northrock Electric Fish Scaler is one of the most rugged units on the market.   The Northrock Scaler is designed to be hung from above. The older model is turned on by removing the head from the U shaped hook, and pushing the hook up. When finished, placing the head back into the hook turns it off.  The current model is turned on using an ON/OFF toggle switch located on the underside of the motor housing. These are pictures of the scaler mounted in hanging position and up close...

Our Northrock Fish Scaler Parts Northrock Standard Duty core and rubber casing assembly. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter. The core inside the casing looks like this:This is a picture of the casing: When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or...

Northrock Heavy Duty core and rubber casing assembly. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter. The core inside the casing looks like this:This is a picture of the casing:When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or casing. ...

Northrock Fish Scaler Standard Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Standard Duty core. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter....

Northrock Fish Scaler Part - Heavy Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Heavy Duty core. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter....

This is the core adaptor for the STANDARD Northrock fish scaler.  http://www.cnn.com/ It attaches to the motor to drive the Northrock Standard core (drive cable).  It will not work on the Heavy Duty model.

This is the adaptor for the Heavy Duty Northrock fish scaler. It attaches to the motor and fits the Heavy Duty cable. There is a separate core adaptor for the Standard Northrock fish scaler.  

The Northrock Scaling Head Complete, Heavy Duty, includes all parts connected to the motor to drive the scaling head for the heavy duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Heavy Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DX2 The Heavy Duty Core...

Our Northrock Fish Scaler Parts The Northrock flexible casing is made of rubber with metal connections and 10" end guards. It is 53" long and 3/4" thick. It is used with both the Standard and Heavy Duty metal cores on Northrock Scalers. It has connections to fit the motor and handle ends. Haskin Strand and Food Machinery of America Standard scalers also use this flexible casing, but need a different casing for their Heavy Duty scalers. When you replace the drive shaft or casing, follow this...

Lubricant for fish scaler rotating shafts. 1 lb container. MSDS (OSHA Safety Data Sheet) here.

The Northrock Scaling Head Complete, Standard duty, includes all parts connected to the motor to drive the scaling head for the standard duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Standard Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DW1 The...

Our Fish Scaling Diamond Tooth Tool The Northrock Diamond Tooth Cutter is the standard head for the Northrock Scaler. Handles most fish, including Flounder, Snapper, Perch, Whitefish, Salmon, Haddock and Sea Bass. It fits the Northrock, Haskins-Strand and Food Machinery of America scalers. Questions Call us with any questions about buying the Northrock Diamond Tooth Tool or to discuss your needs and the processing at your facility. We will help choose the best electric fish scaling and...